USHIO SP-11 UV點光源機
USHIO SP-11 UV點光源機 燈泡式紫外線光源設備
‧ 1.適用於光學產品之UV膠快速硬化、接著固定用
‧ 2.新機種，使用高功率全新燈管
‧ 3.積光量較以往高3倍，照射時間縮短，使用台數減少
‧ 4.波長廣，針對深層及高密度UV膠硬化表現佳適用於光學產品之UV膠快速硬化、接著固定用
‧ 5.專用燈泡 , 可訂製各式對應的石英光纖管
SP-9 已停產，SP-11為替代機型
USHIO SP-11 UV點光源機 燈泡式紫外線光源設備
Model SP-11
External dimensions (mm)156W × 226H × 325D
WeightApprox. 8.3 kg
Light sourcePreset type 275 W
UV lampUV intensity 6500 ｍW/cm2)[Conditions] Ushio Fiber SF-101AQ, 15 mm illuminance distance, Ushio illumination meter and sensor UVD-S365 (1 mm detector diameter)
[Supplement] Since measurement at the UV wavelength of this product is difficult with an illumination meter, it should only be referred to as a guide. In broad wavelength cases such as this product, curing speed may be faster depending on the material. A motorized shutter is installed. Timer or manual control availableShutterTimer setting: 0.5 to 999 seconds (@0.1 s/step), 1000 to 9999 seconds (@ 1 s/step)WeightApprox. 8.3 kg
[Supplement] Since measurement at the UV wavelength of this product is difficult with an illumination meter, it should only be referred to as a guide. In broad wavelength cases such as this product, curing speed may be faster depending on the material. A motorized shutter is installed. Timer or manual control availableShutterTimer setting: 0.5 to 999 seconds (@0.1 s/step), 1000 to 9999 seconds (@ 1 s/step)WeightApprox. 8.3 kg